353
2GIG GoControl Panel User Guide
Note: This guide is based on the official 2GIG CNTRL2 User Manual. For installation or warranty support, contact your device manufacturer.
System Overview
The 2GIG GoControl Wireless Security System provides burglary, fire, and emergency protection. It uses wireless sensors, a central touchscreen panel, and can connect to a monitoring station via phone or cellular service.
It also supports Z-Wave home automation, allowing you to control smart devices directly from the panel or remotely.
Basic Operation
Arming the System
- Stay Mode: Arms perimeter sensors only (doors/windows) while you’re home.
- Away Mode: Arms both perimeter and interior sensors when leaving.
- Both modes include Exit Delays and Entry Delays to avoid false alarms.
Disarming
Press DISARM on the touchscreen and enter your user code. If enabled, a key fob can also disarm without a code.
Emergency Buttons
The panel can be configured with PANIC, FIRE, and EMERGENCY buttons. Press and hold for 2 seconds to trigger an alarm.
Panel Features
- Color touchscreen for arming, disarming, and settings.
- Voice prompts and chimes to identify events (e.g., “Front Door”).
- Siren with battery backup.
- Wireless key fob and keypad support:contentReference[oaicite:5]{index=5}.
Maintenance
- Replace the special console battery pack (2600mAh Ni-MH) when needed.
- Test the system weekly: sensors, sirens, phone/cellular connection.
- Clean the touchscreen with a soft dry cloth (use screen lock mode while cleaning).
- Update time/date and user codes via the Toolbox menu.
Download Full User Guide
You can download the complete 2GIG GoControl User Guide (PDF) for full installation and troubleshooting instructions.
